Back To Basics: How To Make Rum At Home

Ok, so this one is for those of you who just don’t want to spend life after SHTF without the occasional cocktail. For that matter, booze is going to be a hot trading commodity if a global, world-altering event occurs and alcohol can actually be used to sterilize wounds. So, we’ll just say that we’re going to teach you how to make rum at home “for medicinal purposes only”. Wink, wink.

What Is Rum?

We all know that rum is a liquor that comes in every color from clear to almost black. It can be very light-flavored, spiced or even dark and rich. What most of us DON’T know, though, is what It’s actually made of.

In essence, rum is just molasses, sugar, yeast and water. That’s it. Of course, if you want to make it a spiced rum, you’re going to need to add those too, but those are the four basic components that make up rum. Oh, and time. It’ll take anywhere from 4 to 10 days from pot to glass.

What Equipment Is Required to Make Rum at Home?

This is where it gets tricky. You can get really fancy with this process or you can keep it fairly simple. Since we tend to be the kind of people who like to keep it simple, that’s what we’re going to do today.

There are several recipes and directions out there that tell you how to make homemade rum one bottle at a time, but what’s the fun in that? We’re going to make ours in a 5-gallon bucket.

You’re also going to need a stockpot, a hydrometer, an airlock and a distiller. You can make your own airlock fairly easily by following many of the instructions that you find online or you can pick on up off of Amazon for about two bucks. Just buy one; it’ll work like it’s supposed to and you won’t have to dig around for a cork and a pen and epoxy and all the other stuff required to make your own.

Here are your basic ingredients:

  • 3 1/2 gallons of water
  • 2 pounds of sugar
  • 3 quarts of molasses
  • 1 Tbsp. distillers yeast (though I know of a couple of old shiners that swear that they’ve used Fleishman’s active dry baker’s yeast forever and that it works just fine.)

The standard rule for most yeasts is 1 tablespoon per 5 gallons of wort, or beginning product.

How to Make Rum at Home

Now we’re getting down to the brass tacks. There are actually only two steps in making the rum; three if you’re going to age it. That’s not strictly necessary, though if you want that dark, heavy flavor, you’re going to have to do it.

Without aging, you simply won’t get that dark, oak color and flavor. If you ask the connoisseurs, rum should be aged for at least a year. You can wait that long if you really want to, but I doubt that most people will after SHTF. It’ll be tough enough to wait the 10 days!

Before you do anything, you need to make sure that ALL of your equipment is squeaky clean. Just a bit of dirt or bad bacteria will ruin your batch of rum.

The first step is fermentation. If you’ve read any of my wine or beer making articles, you know how this works. You need to add half of the water and all of the sugar and molasses to a stockpot. If you have one big enough to hold all of the water, then do so.

Bring the water up to where it’s warm, but not so hot that you can’t stick your finger in it. Dissolve the sugar and molasses well. The sugar will be easy; the molasses will take a little more work.

Let the mixture cool until it’s just warm – if you have a candy or meat thermometer, test it – it should be between 75-80 degrees. It needs to be warm enough to activate the yeast but not hot enough to kill it. Take out a cup or so of the sugar water and dissolve the yeast in it. When it starts bubbling and foaming, you’re in business. Add it back into the pot with the rest of the sugar water.

Now you need to pour the wort (that’s what it’s called at this point) into your fermentation bucket. This can just be an extremely clean 5-gallon bucket but you need to set it up with your airlock attached to it first.

Lock the lid down and wait for the fermentation process to start. You need to store the bucket in an area that’s between 70-80 degrees F. Within 24-48 hours, you’ll notice that there are no more air bubbles coming through the airlock.

Video first seen on Bet U Didnt Know

This is when you start timing your rum. It will take 3-10 days for it to be ready. Use your hydrometer to test it every day after about the 3rd day. When the hydrometer hits 990 or stays the same for three days, it’s time to distill it. 990 will put it at about 16-18% alcohol, or 32-39 proof. Letting it sit a bit longer may make it a bit stronger. That’s when you follow the 3-day rule.

Here is an extremely important step that you don’t want to skip. Once the hydrometer says that it’s done, place your bucket somewhere cool for a dad so that the yeast settles to the bottom, if it hasn’t already. You’ll know because the top of your wort will be foamy looking. If it’s not, the yeast has already settled and it’s ok to distill it.

DO NOT pour the yeast into the distiller. It will alter the taste of your rum. Speaking of tastes, your wort may smell really funky at this point; don’t worry about it because it’s supposed to.

Now, to the distiller. You can buy one or you can build one by following the link to the pressure cooker distiller  in this article. Just run your wort through the distiller. The first time through, it may still have a bit of an amber color to it. Taste it and if you want it a bit more refined, run it through again. Just run it through the distiller until you’re happy with it.

At this point, you can drink your rum or you can put it in a cask and age it. You can also get fancy and add some oak chips to the bottom of your jars (unless you’re using bottles, then this can be a bit tricky) and let the rum sit for a few days absorbing the flavor of the wood. If you like spices, add some cinnamon or other favorites. There are plenty of recipes across the web for “spiced rum”.

If you are interested in making your own food then click here to find out more about this awesome survival guide on food independence.

Now you know that you can make rum at home from simple, basic ingredients in very little time. If you have anything to add, please do so in the comments section below!

This article has been written by Theresa Crouse for Survivopedia.

Written by

Theresa Crouse is a full-time writer currently living in central Florida. She was born and raised in the hills of West Virginia, where she learned to farm, hunt, fish, and live off the land from an early age. She prefers to live off the grid as much as possible and does her best to follow the “leave nothing behind but footprints” philosophy. For fun, she enjoys shooting, kayaking, tinkering on her car and motorcycle, and just about anything else that involves water, going fast, or the outdoors.

Latest comments
  • Excellent article. Can you make it in the 80 proof range?

  • Better to use the distiller’s yeast, as you proposed as it will ferment to a much higher alcohol content than the bread yeast. One will have a higher alcohol by volume to begin with when one starts the distillation process. One can certainly distill more than once to have a more pure alcohol with less water in it. Your desired water temp during distillation is around 185 degrees F.

  • Note to readers in the US. It is illegal to distill alcohol without a license in the United States.

    • What they don’t know cant hurt them.
      Don’t sell or otherwise tell people what you do.

    • That only applies if you intend to transfer it from one person to another…you can make it for your own personal use, but may not sell or give away, or otherwise transfer possession of it to anyone without a permit

      • Under federal law i the U.S. distilling is illegal. Does not matter if it is for personal use or not. Alot of people state that its legal for personal use and that you can make X number of gallons, but this is false. Hate to see someone get into trouble for receiving false information. You can go to the link to read the law for yourself. http://www.ttb.gov/spirits/home-distilling.shtml Also, If you are going to try this, Learn how to do it properly and don’t use a damn crockpot still lol You can learn the right ways over at http://homedistiller.org/

    • My friend in a SHTF situation I doubt we are all going to care… And for that matter I doubt most of us reading this care now if we’re this interested in learning lol… Either way it’s a fair point

  • Thanks for an informative fun article. Just what people need to kick off a new hobby. It makes me wonder how sorghum would turn out. Hmmm.

  • As a distiller by trade I would also note that the first portion that comes off of the still is incredibly toxic, the part that leads too blindness after a time, as well as liver and kidney failure. It also tastes like nail polish remover. Using the above be recipe removing the first cup (8 ounce) should suffice. Don’t waste it though! The first part, or heads, are a great fire starter, antiseptic, or cleaning agent!

  • There should be a warning that the first portion of distilled liquid should be discarded.3.8 oz It is highly irresponsible to not do so as it contains acetone and methanol..I am surprised ,that this was highlighted last year, yet it still does not include this warning

  • I have a perfect background check and I have just spent 2 yrs getting an Alcohol Beverage Control License from California, I’m now a Distilled Spirits Plant, You better have a super clean background!!!!!!!!
    Its not only State wide Illegal, its federally illegal !!!!!!
    Listen to dave people!!!! as he said it sill illegal no matter how you look at it with out a license! ITS CALLED “BOOT LEGGING”

    that’s why both sides of the great Mississippi River we have BUD, Coors, Miller and the rest have breweries on both sides because taking alcohol across the Mississippi even today is still ” BOOT LEGGING” !!!!!!!
    The laws have never been changed!!
    Look i up at ABC.Ca.Gov
    They still think every one is or has ties to the under ground and trust me they are very very very inquisitive about your life.
    DON’ GET CAUGHT PEOPLE!!!!!!! its up to a $250,000.00 Fine and Ruin your life for jail time too!!!! o check out the sit above i’m not lying!!

    GOOD LUCK!

  • How much menthanol should i pour off on a batch this size, and… Does the temp i distill at effect any thing?

LEAVE A COMMENT